Monday, April 15, 2013
Mitsubishi L300 engine inspection procedure
POWER STEERING oil pump drive BELT tension check and adjustment: the belt between the tip of the Finger, lightly tap the arrow shown in the figure in the center of the pulleys and measure the belt vibration frequency. Apply to the location of the arrow on the image as a means of pressure between 98N by pulleys and then measure the deflection.
AIR CONDITIONING COMPRESSOR DRIVE BELT TENSION CHECK-OUT AND CONTROL. (1) loosen the tension pulley mounting nut. 2. adjust the belt tension adjustment bolt. (3) tighten the nut to the mortgage. (4) check the belt deflection and the tension and adjust as necessary. The warning out after turning crankshaft once or more in a clockwise direction. Check that the ignition timing is a constant value. A Constant Value. Prior to the inspection of the vehicle preceding the set condition. To replace the three-way catalyst when the contents do not contain the value of the CO, the standard, even if the result is a normal al items. Connect the three-way Union vacuum hose fuel pressure regulator and air conditioning intake session and connect to the vacuum gauge.
No comments:
Post a Comment