Monday, April 15, 2013
E50-Opel Corsa trailer hitch installation
11 1 2 3 4 5 6 7 8 8 9 9 9 9 10 10 11 11 (A) in the case of plastic elements (B) Clamp the trademark, which is the ISO PN cables into 1 L left rear fog lights 3 lights directed at the 2 + 4 (R) the right of the 31 countries targeted for the lights on the right side of the parking lights 5 58R 6 54 Stoplights 7 58 L on the left side of the parking lights suitable for teaching this towbar is designed for Assembly on the following car models: OPEL CORSA "D", 3/5-door is made of since 2007, the list does not. E50 and is ready to tow trailers max total weight 1300 kg and max vertical load 50 kg. The manufacturer thank you for buying our product. Their reliability has been confirmed many of the tests. The reliability depends on the proper configuration of the hitch and the proper course of action. This is why we read carefully the following instructions and apply the tips. The hitch should be installed
sections describe the car manufacturer. Help on configuration 1. For tow hitch installings should extract the buffer and its metal fixing, which is put together again. 2. The towbar (POS. 4 and 5) brackets slip into the platform members (the holes (B) projecting threaded studs). Fix them loosely using bolts M10x40mm (POS. 9). On the pins after the dissolution of the two fixing nuts at a turning point. 3. lift the main bar, tow hitch (POS. 1) fitted on the brackets on the hitch (POS. 4 and 5) and fix using bolts M12x35mm (pos. 
as shown in the drawing (4 pos. A) slip the plastic elements, which would be a move to buffer the metal column. 5. its axis one would be to cut the foot buffer fragment: width 50 mm, height 40 mm. 6. Install the bumper. 7. Fix tow ball (POS. 2) using the bolt M12x75mm (POS. 6) and M12x70mm (POS. 7). Bolt M12x75mm fix also the socket bracket (part 3). View. 8. tighten all bolts according to the table of torque. 9. connect the electric wires to the socket on the 7-pole
No comments:
Post a Comment