Monday, April 15, 2013
Renault mascot 3125/760/installation instructions for W21
ERILLISOHJEET links
1. cut the hose properly fitting the cutter can be used (not scissors)
2. when inserting the tubing connection about 14 mm is original, until then heard.
3. remove the tube push the flange connection and at the same time pull on the tube. (No tools necessary).
4. attention, when the tube is removed, it is important to cut the 14 mm to the head before the reconnection.
5. it is recommended that LOCKTITE is used together with threaded fittings.
Important
• The installation manual should be read in its entirety before you begin the configuration.
• This series does not add car G.V.W. (total weight), the safety and the risk of damage to the vehicle, do not exceed the maximum load recommended by the manufacturer.
• Do not fill the airbags before installation.
• Kit installation does not exceed the max and min boundaries, incorrect use or due to the inflation may cause the suspensions.
No comments:
Post a Comment