Monday, April 15, 2013
2010 Toyota Prius PHEV conversion kit instruction manual
A plug-in Hybrid Electric vehicle conversion kit (PHEV) is a hybrid of the rechargeable battery, which complements the vehicle's battery. It supplies electricity stored in the battery which is complementary to that of the outlet, offering 20-40 miles on a single battery charge is sufficient for most normal electrical driving in their daily commutes. It is a safe, reliable, saving you and the user and environmentally friendly.
Attention
1. read the instructions before installation.
2. never connect the wires wrong.
3. new batteries is again loaded with a comprehensive and balanced before use.
4. check the battery voltage, and the balance on a regular basis, the first few times.
5. in order to extend battery life, the equipment must download, use 110VAC household electrical powered charger is delivered to each full-time and the cells are fully balanced when charging.
6. Fuse compartment box is set to be switched off automatically if the current exceeds a pre-set limit
(100). If this breaker off then need to manually switch it back on before use.
7. switch the devices off immediately, if the fault can be found while driving.
8. do not disassemble the parts if the device is functioning normally
With this product
? 16/32 the robot cells 2KWH/4KWH, lithium-ion batteries
? Battery cell balancers — one out of every 8 monitoring and balancing the voltage of the battery to avoid over-or payments to individual cells. This extends battery life by a factor of 3.
? high power charger 48V/15A
? 3000W DC/DC-converter and driver
? fire extinguisher protection, when the temperature is greater than 105 ? — first of all, open the lid and take the blue isolating inserter will work.
? Automatic DC circuit breaker to disconnect in case of operation of the equipment-high voltage high current fault.
? Easy to install casing, easy-to-use System.
No comments:
Post a Comment