Monday, April 15, 2013
HELP-OPEL WITH THE GRAPHICS CARD AND THE STEM ADAPTER
INSTALLATION precautions when selecting the installation site, consider the following facts – the unit is not set to the temperature exceeds 55 C (such as in a car parked in direct sunlight) – the unit is not in direct sunlight. -The unit is not near heat sources (heaters). -The unit is exposed to rain or moisture. -The unit is not exposed to excessive dust and dirt. -The unit does not have excessive vibration. WARRANTY-this product includes a 12-month warranty is valid from the date of purchase-adapter and lead to replace for free if a failure due to a manufacturing defect. – Adapter is installed per the installation instructions. -The device must be returned to the pharmacist in accordance with the requirements of the terms of this warranty. – This does not affect the
statutory rights. Instructions for the OPEL DISPLAY DRIVER and the STEM ADAPTER operating instructions, DOPS001, DOPS002, DOPS003, DOPS004 & DOPS005 trouble shooting Guide (1) screen does not show the radio information. – Check the uni-link plug is installed in the rear socket on the radio. -Check the plug is installed in the adapter 14pin. – Check the connections to the adapter and stereo-take supplying dealer. -Check that the radio remote control of power has been a contact form (step 5) to Reset the stereo using the embedded front panel button (see User Guide)-take supplying dealer. (2) on the steering wheel controls are not working on the radio. -Check that the 3.5 mm jack plug 3.5 mm socket will be installed in the radio. -Check the adapter plug 14pin properly fitting. – Check for a broken or disconnected wires inside the included harness. The button on the front panel to reset the stereo using the embedded – (see user manual) (3) the radio will not work after the installation. -Check that all connections are fully inserted into the rear Line connection to the car stereo. -Check that there are no broken pins in the lead ...
No comments:
Post a Comment